KELOX-ULTRAX FB pipe

ULTRA PE-RT pipe type 2    

for multilayer composite pipes and PE-RT solid plastic pipes

KELOX-PROTEC push connector made of metal d16–32 mm

Multi-sealing non-detachable push  connection made of stress-free annealed, dezincification-resistant brass, non-porous metallised, with NANO-coated EPDM-O-rings, 2 K grab ring for frictional connection, with transparent sleeve and inspection window as insertion control, incl. yellow protector ring made of high-strength plastic, prevents insertion of non-calibrated pipes, suitable for drinking water, as permanently sealed connection to modular pipes.
Processing without pressing tools "PLUGGED IN, TIGHT"

KELOX-PROTEC Zeta push connector made of metal d16–25 mm

Multi-sealing non-detachable push  connection made of stress-free annealed, dezincification-resistant brass, non-porous metallised, with NANO-coated EPDM-O-rings, 2 K grab ring for frictional connection, with transparent sleeve and inspection window as insertion control, incl. neon green protector ring made of high-strength plastic, prevents insertion of non-calibrated pipes, suitable for drinking water, as permanently sealed connection to modular pipes.
Flow-optimised fittings to reduce pressure losses in the system.
Processing without pressing tools "PLUGGED IN, TIGHT"

KELOX-PROTEC push connector made of PPSU d16–25 mm

Multi-sealing non-detachable push  connector made of PPSU, with NANO-coated EPDM O-rings, 2 K grab ring for frictional connection, with transparent sleeve and inspection window as insertion control, incl. yellow protector ring made of high-strength plastic, prevents the insertion of non-calibrated pipes, suitable for drinking water, as permanently sealed connection to modular pipes.
Processing without pressing tools "PLUGGED IN, TIGHT"

KELOX threaded connection d16 - 25 mm

As permanently sealed connection to system parts, permanently connected to the pipe, has nut with internal thread and support sleeve, includes clamping ring, made of stress-free annealed brass, non-porous metallised.

KELOX-ULTRAX press connection made of metal d16 - 25 mm

Multiple sealing non-detachable press connection made of tension-free annealed brass, non-porous metallised, incl. stainless steel press sleeve with inspection window as insertion control for highest dimensional stability after pressing and EPDM O-rings.
Additional testing security for the dimensions d16–50 mm – "unpressed, leaky"

KELOX-WINDOX press connection made of plastic d16 - 25 mm

Non-detachable press connection made of WINDOX-PPSU, impact-resistant, halogen-free, suitable for drinking water, incl. stainless steel press sleeve with inspection window as insertion control for highest dimensional stability after pressing and EPDM O-ring.
Additional testing security – "unpressed, leaky"

Loop laying with FB clamping rails or FB fixing plate makes particularly effective use of the module properties of the KELOX FB: 

• The (warmer) supply can be positioned where the highest heat output is needed:
  • Exterior walls
  • Window areas
  • Terrace entrances 
• Edge zones with increased heat output are easily selectable
• Surface temperature has a constant course (no waviness).

Laying the KELOX FB modular pipes on the FB fixing plate is easy to carry out to a high standard thanks to the typical modular properties of the pipes. Convenient routing and connection of the FB fixing plates through the thoughtfully designed male and female connections on one longitudinal and one broad side of the FB fixing plates. Laying is possible in spiral or loop form.

Material

Polystyrene panel with deep-drawn pipe holding connectors for stable attachment of the KELOX FB modular pipes d16mm; connection of the individual panels by overlapping.

Pipes

KMU120 KELOX-ULTRAX FB pipes (blue)

Ideally suited for laying on the KELOX FB fixing plate without the need for any additional attachment thanks to their typical modular pipe properties. 

KU100 ULTRA PE-RT FB type2 pipes (red)

A five-layer full plastic pipe alternative made of PE-RT; resistant to oxygen and water vapour diffusion.

The FB staple plates are available in rolls. Furthermore, the rolls are provided with an overlapping edge including an adhesive strip on the long side and one wide side.
The KELOX FB modular pipes or ULTRA PE-RT pipes can be laid individually in spiral or meander form.

Material

Lambdapor made of expanded polystyrene in accordance with ÖNORM B 6000, free of HFCs and CFCs, incl. lamination with HD-PE fabric and PE coating, incl. overlap edge with adhesive strip and grid subdivision 

Pipes

KMU120 KELOX-ULTRAX FB pipe (blue)

Due to the typical module properties, it is ideally suited for laying and fixing on the KELOX FB stapler panel with KM611 stapling needles.

KU100 ULTRA PE-RT pipe type 2 (red)

Is a five-layer full plastic pipe alternative made of PE-RT; resistant to oxygen and water vapour diffusion.

KM637 KELOX FB pipe mats VZ
Galvanised metal pipe mat in mesh sizes 10 x 10 cm or 15 x 15 cm (5 x 5 cm on request). 
Size: 2.1 x 1.203 m Wire thickness 3 mm

KM637B KELOX FB pipe mats
Bare metal pipe mat in mesh sizes 10 x 10 cm or 15 x 15 cm (5 x 5 cm on request).
Size: 2.1 x 1.2 mWire thickness 3 mm

KM637C KELOX FB Clips
For attaching KELOX FB pipes to the KM637 or KM637B KELOX FB pipe mat.

KM637S KELOX FB sack wire loop
For attaching and connecting the KELOX FB pipe mats using the WZ949 KELIT binding machine 

Pipes

KMU120 KELOX-ULTRAX FB Pipe (blue) are ideally suited for laying and fixing on the KELOX FB support mat with KM637C clips due to the typical module properties.

KU100 ULTRA PE-RT pipe type 2 (red) is a plastic pipe alternative made of PE-RT; resistant to oxygen and water vapour diffusion 

KM636S KELOX FB Velcro bases. FB Velcro bases are available in rolls. Furthermore, the rolls are provided on the longitudinal side and one broad side, with an overlapping edge incl. an adhesive strip. Due to the improved lambda value, the KM636S FB Velcro base EPS-T 650 with 28/25 mm thickness has the same insulation value as a conventional PS panel with 33/30 mm thickness.
Installation of the KELOX FB Velcro pipes or ULTRA PE-RT Velcro pipes is possible individually, in spiral or loop form.

Material

Lambdapor made of expanded polystyrene in accordance with ÖNORM B 6000, free of HFCs and CFCs, incl. lamination with HD-PE fabric and PE coating, incl. overlap edge with adhesive strip and grid subdivision 

Pipes

KMU121K KELOX-ULTRAX FB Velcro pipes (blue)

Ideally suited for laying and fixing on the KELOX FB Velcro plate without the need for any additional attachment thanks to their typical module properties and the Velcro strips wrapped around them.

KU101K ULTRA PE-RT FB Velcro pipes (red)

A five-layer full plastic pipe alternative made of PE-RT; resistant to oxygen and water vapour diffusion, with Velcro strips wrapped round.

Self-adhesive footfall sound insulation under screeds for fastening KELOX FB hook-and-loop pipes made of HCFC- and HFC-free material

• Conventional and liquid screeds 
• Thin bed construction with 1 cm overlap on the pipe (Details according to Röfix manufacturer information)

Pipes

KMU121K KELOX-ULTRAX FB Velcro pipes (blue)

Ideally suited for laying and fixing on the KELOX FB Velcro film without the need for any additional attachment thanks to their typical module properties and the Velcro strips wrapped around them.

KU101K ULTRA PE-RT FB Velcro pipes (red)

A five-layer full plastic pipe alternative made of PE-RT; resistant to oxygen and water vapour diffusion, with Velcro strips wrapped round.

KELOX DRY, Universal, optimised underfloor heating system for all new and old buildings. Particularly suitable for renovations, additions and use in drywall and wood constructions.

Aluminum baffles ensure optimum heat transfer directly to the floor surface, making the system extremely responsive.
The system elements made of high-pressure polystyrene can be directly covered with different top floors depending on the traffic load immediately after pipe laying. This enables a shortened construction time and a low installation height.